Fancier Titanium Enail Case Kit
Titanium Nail Sizes: 10mm flat, 16mm, 20mm
(Choose above)
Titanium Nail Sizes: 10mm flat, 16mm, 20mm
(Choose above)
The PID Enail controller box controls the hot runner heating coil. The controller will heat from room temperature to 710 degrees in about 3 minutes. Temperature Range is 0-999 Degrees.
The coil is rated at 100W under 110VAC. It is a barrel shaped coil with a 10mm, 16mm, or 20mm inner diameter size choice. The heating coil is 59 inches in length with a black and yellow fire retardant sheath.
Please refer to the included user manual before operating.
The titanium nail bottoms are reversible for a 6 in 1 10mm/14mm/18mm male and female rig fitment.
They fit most all rigs!
Kit Includes:
1x PID Temperature Controller Box
1x Heating Coil
1x Power Cable
1x Titanium Nail
1x Titanium Carb Cap
1x Case
2x Silicon Jars
1x User Manual
Fancier Enail Specifications:
Voltage: AC110V -240V 50-60HZ
Temperature Range: Room Temperature~999 Degrees °F
Temperature stability: Approximately 5°F-7°F
Coil Shape: Barrel (Spiral)
Length of coil: 1.5 Meter (5ft) Kevlar Fireproof Sheath
Thermocouple Type: “K” type
PID Dimension/unit: 3.5 x 1.5 x 5.0 inch (93x37x129mm)
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.
Related Products
98.000 $
