Crossing Core E-Rig Kit
*NOTE: PREORDER-SHIPS IN APPROX. 1 WEEK*
The Crossing CORE is an ultra-portable, ultra-powerful, e-nail that is compatible with all Sai Plus and Sequoia coils from Crossing Technology.
The CORE has innovation and style with a top glass water bubbler to cool and filter vapor, and your choice of automatic or manual heating modes. Choose between 4 preset heat levels or hold the button to heat the atomizer manually. Crisp LED indicator lights and haptic feedback (vibration notifications) will keep you informed, and the 60 second cycle timer, or manual 15 second cycle timer will keep you and your material safe! The directional airflow carb cap helps control the airflow and allows you to easily move your material around while you're using your CORE, making sure that the material is perfectly, evenly heated, and preventing any waste!
Key Features:
* Quick heating. The Core reaches the highest temp in 13 seconds
* Portable, travel friendly size and shape
* Convenient Travel Casing
* Sai Plus/Sequoia Coil Compatibility
* Water Bubbler for Cool, Filtered Vapor
* Directional Glass Carb Cap for Airflow Control
* 4 Preset Temperatures or Manual Temperature Control
* Automatic Shutoff Timer 60 or 15 Seconds
* Haptic Feedback (vibrations) and LED Indicator Lights
*Large 3000Mah Built In Battery
* USB-C Charging
* Silicone Cover for a Protected Heater Base
* Single Button Control
Using the Core:
The CORE is powered on by pressing the button 5 times in quick succession. The LED lights will indicate the remaining charge. (Green for full, White for medium, Blue for low, and Red for very low.) Change the heat setting by pressing the button 3 times. LED lights will then indicate the temperatures. (Green for high, White for medium/high, Blue for medium, and Red for low.) Once an appropriate temperature has been selected for your coil, you're good to go! Press and hold the button to manually heat the atomizer for up to 15 seconds or press the button twice to start an automatic heating cycle instead. In automatic heating cycles the CORE will preheat and then vibrate when it's ready to use!
Included Items in Core Kit:
* The CORE E-Nail
* Glass Water Bubbler
* Carp Cap with Tether
* Triple Titanium with Black Ceramic Coil (pre-installed)
* Titanium Bucket coil
* Quartz Bucket Coil
* 5 Q-Tips
* 2 Alcohol Pads
* 1 Silicone Storage Container
* 1 Loading Tool
* 1 USB-C Charging Cable
* 1 Power Adapter (USA Style Plug)
* 2 O-Rings
* 1 Travel Case with Foam
* 1 Protective Silicone Cover for Heating Base
* User Manual
How to clean:
- Use cotton swabs to clean the Quartz bucket or Titanium bucket each session. Clean the CORE base and air pathway when maintenance is required.
- Simply soak the whole coil in a cup with ISO and dry the coil before use. The bucket needs to be taken out when cleaning the Quartz Bucket or Titanium Bucket coil.
Charging:
- Plug the USB-C cable into the charging port and connect to the provided charging brick for fast charge, it requires approximately 1 hour 45 minutes to fully charge.
- Light will flash red while charging and solid red when done.
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks.
Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.