Exseed Dabcool W2 V2 Kit

The Dabcool W2 is a electronic dabbing mechanism that comes with 1500mAh battery capacity. Featuring intelligent temperature control system, you can press to adjust temperature (450℉/500℉/600℉/680℉). There is a design to increase inhalation resistance and help the atomizer to heat up. Designed with 4 gears, it can support all different types of concentrates.

Gunmetal Gray, Blue, Red, White, Gold, Rainbow

Glow in the Dark Colors: Glow-Black, Glow-Green, Glow-Blue

1. On/Off:Press For 3seconds
2. 4 Unique Manual Heat Settings(450℉/500℉/550℉/600℉)
3. 20 Second Average Heat-Up Time
4.Micro-USB Fast Charging, Full Charge Time:About 2 Hours
5.Atomizer Compatible With Other Devices


6.The Device Has Low Voltage Protection, Short Circuit Protection And Overheating Protection.



Packing:
A: Alcohol Pad
B: Micro-USB Super Charger
C: Loading Tool
D: Glass Attachment
E: Atomizer
F: Base
G: Silicone Box
H: Carb Cap
I : Quartz Bowl

J : Ceramic Bowl




How to use:
STEP 1: Fully charge device before first use. White lights pulse while charging, and turn off automatically when complete.(1 light: 0-25%; 2 lights: 25-50%; 3 lights: 50-75% ; 4 lights: 75-100%)
STEP 2: Fill glass with water just above the air-hole. Do not fill glass while attached to base.
X- Do not allow water in lower section!
STEP 3: Align inlet hole on the front of the glass with atomizer. Carefully place the glass into the base.
STEP 4: Hold the button for 3 seconds to turn on device (same way to turn off device). The white lights will flash once and the ambient lights will flash sequentially red>blue>green.
STEP 5: Single click to toggle through heat settings.
1 white light: 450℉       2 white lights: 500℉
3 white lights: 550℉      4 white lights: 600℉
Device will vibrate once while changing heat.
STEP 6: Use Loading Tool to place contents on the bottom surface of the bowl [not the side].
STEP 7: Place carb cap on top of atomizer.
STEP 8: Double click to initiate heat-up [5 seconds avg. ], device will vibrate twice and ambient lights will be red. Single click the button to turn off the heat-up process at anytime.    
STEP 9: Ambient lights will turn green when ready.   ( green lights will be on for 20 seconds, then heat up process automatically stop and ambient lights turn blue)  
STEP 10: Use a cotton swab to clean the chamber after each use.